motogadget mo.wave

It lets any indicator light fade in and out smoothly - even LED indicators. Hard-switching indicators, especially LED indicators, go on and off in a dull and boring way - with the mo.wave you can make the indicators light up like waves. An absolutely new look for the indicator light - ultra small and light, practically just a piece of cable with a tiny candy-sized device. Ideal for any kind of converted and styled motorcycles or cars to attract more attention.

• Unique fade-in/fade-out effect
• Ultra small and lightweight, practically just a piece of cable with a tiny candy-sized device  
• Ideal for custom bikes and conversions with limited space - clunky standard flasher relays or load resistors are a thing of the past
• Can be installed e.g. in the handlebar tube, frame tube or in the wiring harness
• Almost load-independent (min. 1 watt)
• Works completely with digital semiconductor technology. Control via microprocessor. No mechanics, no coils, no contacts
• Always constant and correct flashing frequency therefore suitable for almost all LED turn signals, all micro turn signals, halogen turn signals, 10 watt turn signals, 21 watt turn signals   
• Works e.g. with 4 turn signals or 2 handlebar end indicators
• Immediate, loss-free, brighter illumination of the indicators
• Super simple connection using just two cables - simply connect in series
• Completely waterproof and vibration-resistant as it is fully encapsulated
• Short-circuit proof, automatic overload protection. Switches up to 100 watts of power.
• No heat generation during operation
• Operating voltage from 5V to 18V
• Also suitable for 6 V indicators

The easiest way to install the mo.wave is to find the original relay and simply replace it with the mo.wave. The mo.wave can NOT replace the push button control when using push button fittings. See product mo.relay+ if you are looking for a flasher relay for push buttons.

On newer Harley-Davidson™ models, the turn signal control is controlled by a special module (TSM/TSSM). The mo.wave can unfortunately NOT replace or supplement these modules.

• Housing L x W x H: 18 mm x 13 mm x 9.5 mm
• Length of connection cable: approx. 2 x 50 mm
• Weight: approx. 4 g

1x mo.wave