mo.tri Triumph adapter

The CAN bus installed in these models reacted immediately by refusing to work if the original instrument was no longer connected. This meant that the desired conversions were hardly possible at this point. The solution, especially for the Twins, is now exclusively available: the mo.tri from motogadget. In addition to information such as speed and rpm, the mo.tri also provides signals for indicator lights: Blinker left/right, tank reserve, fault memory, high beam, neutral, H2O hot, oil pressure.

Some indicator lights on instruments with 4 or 5 LEDs have multiple functions. Another big advantage is the almost foolproof installation! The original connector is used and the cables for the instrument and indicator lights are connected to the terminals of the mo.tri using a color scheme. No soldering or searching for cables required. No intervention in the wiring harness. No loss of vehicle warranty. Fast Plug 'n Ride, it couldn't be easier. A great time saver and therefore worth hard cash.

The models listed above are currently available. Other models will follow gradually. Please select your model and model year. The model year is not necessarily the same as the year of manufacture. The 11th digit of the chassis number indicates the model year. For example, an 8 stands for model year 2008, an A for 2010, a B for 2011, a C for 2012 etc.

Length/ width/ height 42 mm/ 42 mm/ 27 mm

• Instrument with approx. 55 cm connection cable
• Connectors suitable for the selected model
• Cable end sleeves
• 2 x M3 screws
• Cable holder
• Cable ties