Fastening brackets / installation aid


Fastening brackets for the motoscope light
Our fastening brackets are made of 2.5 mm thick aluminium sheets, which are finely surfaced and anodized either in black or aluminium nature (silver). We offer two versions of fastening brackets (A and C) in order to make the fastenig of our instruments as easy as possible.
The fastening brackets take up the contours either of the motoscope light alone (version A) or together with the motosign (version C). Therefore, the customer is saved much cutting and filing work. The holes for fastening the instruments to the brackets are pre-drilled.
The prefabricated fastening brackets can be used universally on many vehicles, e.g. at the fork bridge. The lower part of the bracket is sufficiently long and has to be cut and drilled to suitable length by the customer.
The aluminium sheets may also be angled or bent to some extent, but you should be careful to make a sufficiently large bend radius, otherwise the anodized surface might crack.
Suitable long fastening screws are part of the delivery. The screws are made of stainless steel (see exaple below at "screw set standard").

  • fastening bracket A for the motoscope light only (without motosign), anodized in black or aluminium nature incl. 3 stainless steel screws (M4). Size see at depiction on the right side.
    Price: 24.- € (incl. VAT)

  • fastening bracket C for the motoscope light in combination with the motosign, anodized in black or aluminium nature incl. 5 stainless steel screws M4. Size see at depiction on the right side.
    Price: 26.- € (incl. VAT)

    ..............................................................................

    Screw sets
    All fastening brackets already contain stainless steel screws . Only security-screws and replacement screws have to be ordered additionally.

  • standard sets contain 5 stainless steel screws in the size M4; depiction see on the right side.
    Price: 4.- € (incl. VAT)

  • security sets contain 3 stainless steel security TORX-head screws in the size M4 and a special TORX-bit tool. This screws make a forbidden dismantling of the instrument much more difficult.
    Price: 7.- € (incl. VAT)

  • security sets with 5 stainless steel security TORX-head screws in the size M4 and a special TORX-bit tool. This screws make dismantling of both instruments much more difficult.
    Price: 8,50.- € (incl. MwSt.)

    All prices are excl. shipping.
    For currency conversion please use XE.com Personal Currency Assistant










    • Fastening bracket A for general use


    Fastening bracket C for general use


    Stainless steel screw kit standard


    Stainless steel security kit